HANGZHOU ZION COMMUNICATION CO.,LTD
HANGZHOU ZION COMMUNICATION CO.,LTD Professional Manufacturer of Coaxial Cable, Lan Cable, Fire Resistant Cable and Cable Accessories!
Add to Cart
Figure 8 Fiber Optic Cable GYTC8S with Stranded Steel Wires for Self-supporting
Quick Detail:
Description:
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.
Applications:
| Figure 8 Fiber Optic Cable GYTC8S with Stranded Steel Wires for Self-supporting | ||||||
| Description&Standards : | ||||||
| The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core.An Aluminum Polyethylene Laminate (APL) is applied around the cable core. which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath. | ||||||
| GYTC8S Cable complies with Standard YD/T 1155-2001as well as IEC 60794-1 | ||||||
| Characteristics: | ||||||
| High tensile strength of stranded wires meet the requirement of self-supporting and reduce the installation cost; | ||||||
| Good mechanical and temperature performance; | ||||||
| High strength loose tube that is hydrolysis resistant; | ||||||
| Special tube filling compound ensure a critical protection fiber; | ||||||
| The following measures are taken to ensure the cable watertight: | ||||||
| (1)Steel wire used as the central strength member; | ||||||
| (2)Loose tube filling compound; | ||||||
| (3)100% cable core filling; | ||||||
| Technical Parameters: | ||||||
| Cable Type | Cable Diameter (mm) | Cable Weight (kg/km) | Tensile Strength Long/Short Term (N) | Crush Resistance Long/Short Term (N/100mm) | Bending Radius Static/Dynamic (mm) | |
| GYTC8S 2~6 Core | 6.80x9.00x18.00 | 214 | 600/1500 | 300/1000 | 10D/20D | |
| GYTC8S 8~12 Core | 6.80x9.00x18.00 | 214 | 600/1500 | 300/1000 | 10D/20D | |
| GYTC8S14~18 Core | 6.80x9.00x18.00 | 214 | 600/1500 | 300/1000 | 10D/20D | |
| GYTC8S20~24 Core | 6.80x9.00x18.00 | 214 | 600/1500 | 300/1000 | 10D/20D | |
| GYTC8S26~30 Core | 6.80x9.00x18.00 | 214 | 600/1500 | 300/1000 | 10D/20D | |
| Optical fiber Characteristics: | ||||||
| G.652 | G.655 | 50/125μm | 62.5/125μm | |||
| Attenuation (+20℃) | @850nm | ≤3.0 dB/km | ≤3.0 dB/km | |||
| @1300nm | ≤1.0 dB/km | ≤1.0 dB/km | ||||
| @1310nm | ≤0.36 dB/km | ≤0.40 dB/km | ||||
| @1550nm | ≤0.22 dB/km | ≤0.23 dB/km | ||||
| Bandwidth (Class A) | @850nm | ≥500 MHz·km | ≥200 MHz·km | |||
| @1300nm | ≥1000 MHz·km | ≥600 MHz·km | ||||
| Numerical Aperture | 0.200±0.015 NA | 0.275±0.015NA | ||||
| Cable Cut-off Wavelength λcc | ≤1260nm | ≤1480nm | ||||
| Storage/Operating Temperature : -40℃ to + 60℃ | ||||||
| Order Informations: | ||||||
| Marking | ZION KT3005 GYTC8S XXX M/FT (or Per customer's request) | |||||
| Package | 1000M,2000M,4000M,Wooden Drum (or Per customer's request) | |||||
| Delivery time | Normally 15 days after received the deposit. | |||||
Competitive Advantage:
1, From raw materials to final products, we perform intense quality checks to maintain our product quality:
A,Incoming material inspected by QC.
B,Manufacturing Process Control
A: Manufacturing procedure
B: Workers trained daily/weekly/monthly
C: Work instructions manual at each work station
D:5S system implemented
E: Machine maintenance procedure
C, Quality Control and Final Inspection
The QC staff will check the material, process product and final product according to the specification or test procedure.
2,Our R&D efforts center on reinforcing and developing element technologies needed to support the future growth and success for customers and ZION.
3,We know customers have urgent needs. We are skilled at effective communication to interact with customers.In order to provide prompt service, we can answer for you 7*24 hours.
4, We can Quickly and professionally answer for the inquire
5, More than 1000 kinds of cable, connectors and assembles can be produce and organized from us
6, Intime delivery
